Table of Contents
Advertisement
4 LCD Operator Option Components
No.
Key
5
6
7
ST T O O
TOP
TO
8
9
10
11
LO
RE
14
Name
Up Arrow
Scrolls up to display the next item, selects parameter numbers
Key
and increments setting values.
Down Arrow
Scrolls down to display the next item, selects parameter numbers
Key
and increments setting values.
Stops drive operation.
STOP Key
Note: The STOP key can be enabled or disabled when operating
from the external terminal or network communications by setting
parameter o2-02.
• Enters parameter values and settings.
ENTER Key
• Selects a menu item to move between displays.
Switches the drive between operator (LOCAL) control and
control circuit terminals (REMOTE).
LO/RE
Selection
Note: The LOCAL/REMOTE key is only effective at a stop in
Key
drive mode. As a safety precaution, it is possible to disable the
LO/RE Selection Key by setting parameter o2-01 (LOCAL/
REMOTE Key Function Selection) to "0" (disabled).
Illuminated while the drive is operating the motor.
RUN Light
Refer to LCD Operator LED Status Indicators on page 15
detail.
Illuminated while the drive is under LCD Operator control when
LO/RE Light
(LOCAL) is selected to run the drive.
YASKAWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual
Function
for
Advertisement
Table of Contents
