Directed Directechs DB3 Installation Manual page 11

Hyundai accent 2013, 403. hkht 1 v3.25
Hide thumbs Also See for Directechs DB3:
Table of Contents

Advertisement

Additional remote start connections
(Not all of these connections may be required for your installation. Refer to the wiring diagram for vehicle-specific connections.)
Wire
12 Volts
Accessory
Factory Alarm Arm - Must use a diode
Factory Alarm Disarm
Ground
Hood Pin
Lock Detection - Must use a relay
Parking Lights -
Power Lock - Must use a diode - Must use a relay
Power Unlock - Must use a diode
Starter
Tachometer
11
403.HKHT1 3.25 2013 Hyundai Accent
©2022 VOXX•DEI LLC. All rights reserved.
Connects To
Wire Location
Ignition Switch, black 6 pin plug, pin 1
Ignition Switch, black 6 pin plug, pin 2
Not Applicable
Driver Kick, white 39 pin plug (MF11), pin 20
Not Applicable
Driver Kick, white 39 pin plug (MF11), pin 38
Headlight Switch, white 14 pin plug, pin 7
Driver Kick, white 39 pin plug (MF11), pin 15
Driver Kick, white 39 pin plug (MF11), pin 16
Ignition Switch, black 6 pin plug, pin 3
Camshaft Position Sensor, engine driver side, black 3 pin plug, pin 2
(+/-)
Wire Color
+
Green (50A)
+
Orange
Double -
Gray/Orange
(chassis ground)
Open
Blue/Black
-
Pink/Black
-
Brown (with door lock switch)
-
Gray (with door lock switch)
+
White
AC
Green

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Directechs DB3 and is the answer not in the manual?

Questions and answers

Table of Contents