Table of Contents
Advertisement
System Installation
This provides step-by-step instructions for installing a Cisco AC/DC Power System. If you are installing
a new system, begin with the
system, go to the
2.1 Pre-Installation
The following information should be reviewed before attempting to install the Cisco AC/DC Power
System.This section includes shelf markings, tools, equipment, and an installation checklist. Refer to the
"1.2 Safety Recommendations" section on page 1-8
Each system installation is unique, so please review specific site requirements and system configurations
Note
before installing the system.
2.1.1 Ground Symbol
Figure 2-1
Figure 2-1
2.1.2 Tools Required
The following tools and parts are required for safe installation of the Cisco AC/DC Power System:
•
May 2006
"2.1 Pre-Installation" section on page
"2.6 System Upgrades" section on page 2-28
shows the ground symbol located on the Cisco AC/DC Power System.
Ground Symbol
Digital multimeter
C H A P T E R
2-1. If you are upgrading an existing
for instructions.
before beginning installation.
Cisco AC/DC Power System User Guide, R1.0
2
2-1
Advertisement
Table of Contents
