2.4 Install Circuit Breakers
Figure 2-15
Install additional rectifiers using the instructions in Steps
Step 8
For more information on installing rectifiers in a powered system, see the
section on page
2.4 Install Circuit Breakers
This procedure is optional for large systems.
Note
Large systems equipped with the 1 RU Distribution Shelf require the installation of circuit breakers to
ensure proper system protection (the 1 RU Distribution Shelf is shipped with circuit breakers installed
for use in medium systems). To install circuit breakers in a large system:
Step 1
Make certain all breakers to be installed are in the OFF position
Cisco AC/DC Power System User Guide, R1.0
2-18
Removing a Rectifier Blank Faceplate
4-2.
Chapter 2
2
through 5.
"4.2.2.2 Add Modules"
(Figure
2-16).
System Installation
May 2006