Table of Contents
Advertisement
Chapter 3
Component Replacement
Figure 3-9
Step 4
Grasp the handle and gently pull the module out and away from the shelf.
The rectifier module may be hot when being pulled from the shelf. To avoid personal injury, wait until
Caution
the rectifier has cooled before removing from the system shelf.
Continue to pull the rectifier until it is halfway out of the shelf. Grasp the bottom of the rectifier with
Step 5
one hand and continue using the other hand to pull the rectifier out.
Pull the rectifier out of the shelf. The system will generate a communication error, which will last until
Step 6
a new rectifier is inserted.
For information on installing a rectifier module, see the
Step 7
page
2-16.
May 2006
Removing a Rectifier
1
2
3.2.4 Replace a Rectifier
"2.3.1 Install the Rectifiers" procedure on
Cisco AC/DC Power System User Guide, R1.0
3-9
Advertisement
Table of Contents
