Advertisement
Quick Links
Power Supply Installation
This chapter applies only to the Catalyst 6800IA-48FPDR switch. It contains these topics:
•
•
•
•
Power Supply Module Overview
The switch operates with either one or two active power supply modules. You can use two AC modules, or
one module and a blank cover.
Table 1: Power Supply Model Numbers and Description
Part Number
PWR-C2-1025WAC=
The 1025-W power supply module is an autoranging unit that supports input voltages between 115 and 240
VAC. All power supply modules have internal fans. All switches ship with a blank cover in the second power
supply slot.
OL-30278-02
Power Supply Module Overview, page 1
Installation Guidelines, page 3
Installing or Replacing an AC Power Supply, page 4
Finding the Serial Number, page 5
Description
1025-W AC power supply module
Catalyst 6800IA Switch Hardware Installation Guide
1
Advertisement
Related Manuals for Cisco PWR-C2-1025WAC
Summary of Contents for Cisco PWR-C2-1025WAC
-
Page 1: Power Supply Installation
Table 1: Power Supply Model Numbers and Description Part Number Description PWR-C2-1025WAC= 1025-W AC power supply module The 1025-W power supply module is an autoranging unit that supports input voltages between 115 and 240 VAC. All power supply modules have internal fans. All switches ship with a blank cover in the second power supply slot. - Page 2 Power Supply Installation Power Supply Module Overview Each AC power supply module has a power cord for connection to an AC power outlet. Figure 1: PWR-C2-1025WAC Power Supply AC OK LED AC power cord connector PS OK LED Release latch...
-
Page 3: Installation Guidelines
Power Supply Installation Installation Guidelines Release handles Retainer clips The power supply modules have two status LEDs. AC OK Description PS OK Description Off (AC LED is off) No AC input power. Output is disabled, or input is outside operating range. -
Page 4: Installing Or Replacing An Ac Power Supply
Power Supply Installation Installing or Replacing an AC Power Supply If a Cisco external power system is not connected to the switch, install the provided connector cover on Warning the back of the switch. Statement 386 Installing or Replacing an AC Power Supply... -
Page 5: Finding The Serial Number
Note Finding the Serial Number If you contact Cisco Technical Assistance, you need to know the switch serial number. You can also use the show version privileged EXEC command to see the switch serial number. Figure 5: 1025-W AC Power Supply Serial Number... - Page 6 Power Supply Installation Finding the Serial Number Catalyst 6800IA Switch Hardware Installation Guide OL-30278-02...