Document Conventions - Cisco 124792 User Manual

Document Conventions

•
•
•
•
•
•
Document Conventions
This publication uses the following conventions:
Convention
boldface
italic
[
{ x | x | x }
Ctrl
screen font
boldface screen font
<
Means reader take note. Notes contain helpful suggestions or references to material not covered in the
Note
document.
Means reader be careful. In this situation, the user might do something that could result in equipment
Caution
damage or loss of data.
Cisco AC/DC Power System User Guide, R1.0
xii
Chapter 2, "System Installation,"
installation process, system upgrade information, and initial system startup for the power system.
Chapter 3, "Component Replacement,"
replacement procedures.
Chapter 4, "System Operation,"
includes normal system control and monitoring.
Chapter 5, "System Troubleshooting,"
Chapter 6, "System Parts List,"
Appendix A, "Translated Safety Warnings,"
document.
Application
Commands and keywords in body text.
Command input that is supplied by the user.
] Keywords or arguments that appear within square brackets are optional.
A choice of keywords (represented by x) appears in braces separated by
vertical bars. The user must select one.
The control key. For example, where Ctrl + D is written, hold down the
Control key while pressing the D key.
Examples of information displayed on the screen.
Examples of information that the user must enter.
> Command parameters that must be replaced by module-specific codes.
provides the unpacking procedure, safety considerations,
provides maintenance procedures and component
provides procedures for using the XCS control system. This
provides troubleshooting procedures.
provides a part numbers list for the Cisco AC/DC Power System.
provides translations of all the warnings used in this
About this Guide
May 2006