Table of Contents
Advertisement
Chapter 2
System Installation
Table 2-1
Description
Quick Installation Guide
System documentation
Table 2-2
Description
M6 0x20mm screw (thread forming)
12-24 x 1/2" screw (thread forming)
M6 cage nut
Mounting bracket 600mm ETSI rack
Quick disconnect circuit breakers
Cable ties
ESD wrist strap
Quick Installation Guide
Table 2-3
Description
6AWG (16mm²) grounding cable
6AWG (16mm²) grounding cable
10 to 8 AWG (6 to 10mm²) cables
22 AWG (0.34mm²) cables
18 AWG (0.75mm²) cables
14 AWG (2.5mm²) cables
26 to 22AWG (0.14mm²- 0.34mm²)
cables
UL Listed double-hole lug 1/4in and
5/8in. center-to-center (lug part #
Panduit LCD6 -14A-L or equivalent)
2.2 Install AC/DC Power System Components
The following sections contain instructions for installing components.
Cisco AC/DC Power System without rectifiers.
May 2006
Supplied Materials for the System Shelf (continued)
Qty
1
1
Supplied Materials for the 1 RU Distribution Shelf
Qty
4
4
4
2
2
4
1
1
Non-Supplied Materials
Qty
1
1
<8
n/a
n/a
n/a
4
2
2.2 Install AC/DC Power System Components
Use
Installation instructions
Installation, provisioning, and troubleshooting
Use
Shelf mounting screws (ETSI racks/cabinets)
Shelf mounting screws (ANSI, IEC racks/
cabinets)
Shelf mounting nut (ETSI racks/cabinets)
Ear mounts (ETSI racks/cabinets)
1RU Distribution Shelf
Securing cables
ESD protection
Installation instructions
Use
system shelf grounding
1RU Distribution grounding (if applicable)
DC load breaker connections (-48V and return)
2A GMT fuse cabling
5A GMT fuse cabling
10/15A GMT fuse cabling
Alarm cabling
Ground cable installation
Figure 2-2
Cisco AC/DC Power System User Guide, R1.0
shows a drawing of the
2-3
Advertisement
Table of Contents
