Models Listed In Manual (And Determining Their Respective Case Dimensions) - Structural Concepts G Series Installation & Operating Manual

Service merchandiser

Hide thumbs Also See for G Series:

Table of Contents

MODELS LISTED IN THIS MANUAL (AND DETERMINING THEIR RESPECTIVE CASE DIMENSIONS)

DETERMINING YOUR MODEL AND ITS CASE DIMENSIONS:

Note 1: Your model number can be found on serial label (usually at case rear). However, serial label

placement can sometimes vary depending upon model. See SERIAL LABEL INFORMATION &

LOCATION section in this manual for serial label samples.

Note 2: Dimensions of most models can be found at www.structuralconcepts.com. Simply enter the

case model number into the Product Number Search box. Click the product specification link for

complete dimensions.

Note 3: If your specific model is not found, contact technical service (phone number is listed at

Technical Service section in this manual) for dimensions.

Note 4: CDRs (Customer Design Requests) are listed with a 4-digit suffix. Dimensions are very similar

to standard model (pre-suffix) dimensions.

>> THIS OPERATING MANUAL ENCOMPASSES THE FOLLOWING MODELS (AND/OR THEIR

RESPECTIVE CDRs).

>> OTHER MODELS (THAT ARE NOT LISTED) MAY ALSO UTILIZE THIS MANUAL.

GHSEH452RSC.7819

GHSSEH652RSC.7819

GHSSEH652RC.7819.6527

Table of Contents

Show Quick Links

Table of Contents

Troubleshooting

Do you have a question about the G Series and is the answer not in the manual?