Setting Up A Smart Id Card - SMART Board 6000S Series User Manual

Chapter 2 Using basic features
Tip
After signing into your SMART Account, be sure to sign out at the end of the session to keep your
account secure. For extra security, admins can enable the Automatic inactivity log out setting within
Settings > Security to make the display sign out of a user's SMART Account automatically after a
period of inactivity.

Setting up a SMART ID card

1. Sign in to your SMART account on your display (see Signing in to your SMART Account).
2. Tap your profile avatar to open the Notification Center .
3. At the bottom of the notification panel, tap ID Card Set Up.
The SMART ID card set up page appears.
4. Tap Add ID card.
5. Type a PIN (which can also include symbols for added security), and tap Next.
The PIN you enter is used when signing in to your SMART account with your SMART ID card. This is
designed to prevent your SMART ID card being used by an unauthorized user.
6. Re-type the PIN you chose, and tap Next.
7. Tap and hold your SMART ID card on the screen in the scan area for 1 or 2 seconds.
8. When prompted, tap and hold your SMART ID card in the scan area for 1–6 seconds again.
Your SMART ID card is now set up and you can use it to sign in to your SMART Account on any NFC
enabled 6000S display that's connected to a network.
smarttech.com/kb/171415 39