Download Print this page

FAR FMP 7121 NA Manual page 60

Advertisement

Available languages

Available languages

ENGLISH
9. Reminder function
Touch "
" button under standby state to
enter to reminder function setting, at this
time the clock position hour value will flash,
minute value will long lit. The reminder time
setting icon " " flashes, the reminder time
icon " " is always on.
(1) Rotate programming switch KB2 to set
the hour, at this time the hour value is always
bright, the value setting range is 0-23;
(2) Touch "
" button again, minute value
flashes, and hour value keeps bright;
(3) Rotate programming switch KB2 to set
the minute, at this time the value of the
minute is always bright, the setting range
is 0-59;
(4) When the alarm time is set, you can
touch "
" for confirmation. At this time,
the display shows the system time, the
reminder time setting icon " " goes out ,the
second icon " " flashes, the "
on, and the reminder time starts to count
down in seconds. When the time countdown
is 00:00, buzzer will sound for 1 minute
(1s/time), and the reminder time icon "
is always flashing (1s/time), then press any
button to stop flashing.
EN 36
"is always
"
Note:
(1) During setup, second icon " " and alarm
clock icon "
" will always bright.
(2) During setup, touch "
cancel the current reminder time setting and
return to standby state.
(3) If a reminder function has been set, then
reminder icon "
"should always be
displayed when the menu is working, and the
reminder time can be queried.
10. Start/pause/cancel function
• After setting up the cooking function,
touch "
" button to start working; if
touching "
" button when the cooking is
suspended, you can restart the work.
• During oven cooking, touch "
once can pause the cooking, temperature and
time will flash display, oven working icon
"
" flashes, function icon is always on;
Touch "
"button again will cancel current
cooking.
• When setting system time, press "
button to exit the clock setting state directly
and return to standby state.
• When oven function, cooking time and
temperature are set, press "
exit function setting state and return to
ENGLISH
" button will
" button
"
" button to
EN 37

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Fmp 7121 xa