FAR FMP 7121 NA Manual page 55

ENGLISH
standby state.
• When the cooking time or cooking
temperature setting are finished, press"
button to start the oven and corresponding
icon stop flashing. After the oven starts
working, the cooking time begin to
countdown by second.
• Cooking note: When cavity temperature is
close to set temperature, oven will prompt
for 2 seconds. If cooking time countdown to
0, oven will stop cooking (exhaust fan will
continue to work), and the system return to
standby status automatically. Buzzer will
continuously prompt for 5 minutes(1s/time),
exhaust fan will stop working after cavity
temperature is below 100℃
• Temperature display range: not lower
than 30℃ display Lo℃when lower than 30℃
,
4. Reservation function
• After setting cooking time and
temperature and before touching "
start-up, touch "
time(reservation function) setting (default
end time=system time +set cooking time),
cooking end time icon " " will flash
(1s/ time) , the reservation function icon
" " is always on and the hour value of
EN 26
"
.
" to
" to enter to cooking end
the clock position flashes at this time,
rotating programming switch KB2 to set the
hour. After the hour time setting is
completed, touch "
minute time setting. At this time, the minute
value of clock position flashes, and the
minute time can be set by rotating
programming switch KB2.(You can use the
" " to switch hour and minute settings
circularly. )After cooking end time setting
completed, touch "
enter reservation status.
• The longest reservation time is 24 hours.
• Under reservation status the display
screen will display as picture 7. All elements
and motors will not work at this time.
.
•
Reservation status display: "
reservation icon will display, "
clock icon will display, clock position will
display system time, the selected menu will
display, temperature position will display
setting or default cooking temperature.
" again to enter the
" to start, oven will
Pic 7: Reservation status display effect
ENGLISH
"
" system
EN 27