FAR FMP 7121 NA Manual page 56

ENGLISH
•
If more than 10 seconds not confirmed
during setting reservation function, the
oven will automatically return to standby
state.
• Under reservation status, you can touch
" " to query the cooking start time
(cooking start time=cooking end time-
cooking time).
• If you need to cancel the reservation
setting , you can touch "
oven will enter to standby mode.
5. Pyrolytic self-cleaning mode
• You can switch to pyrolytic self-cleaning
mode by rotating programming switch KB1.
The default temperature of this mode is not
adjustable, default working time is 1.5 hours.
You can rotate KB2 to adjust the working
time, adjustable working time range is min.
1.5 hours and max. 2.5 hours.
• After selecting the pyrolytic self-cleaning
mode and setting working time, touch "
to start working. At this time, "
display, door lock will be activated, door
lock icon " " will always display,
indicating that the oven door has been
locked and pyrolytic self-cleaning mode
EN 28
" to cancel it and
"
" icon will
starts, touch " " button can pause or cancel
the function.
• After the self-cleaning function is
confirmed and started, clock position shows
working countdown time, temperature
position shows " ". Oven lamp cannot be
used after pyrolytic self-cleaning mode is
activated.
• After start self-cleaning, door lock
function will be activated automatically, the
oven door will be locked and self-cleaning
process starts. After self-cleaning process
starts, if the display screen shows fault code
"E-3", please refer to protection function for
problem analysis. You can touch "
cancel the fault code and return to standby
mode. After clear the fault code, reset
self-cleaning function, and touch "
again to start.
6. Door lock function
6.1 Door lock display: When self-cleaning
process is completed, oven will enter
standby mode. When oven cavity
temperature is higher than 300℃,display
screen will display door lock icon "
(display effect refer to picture 8.) Door lock
ENGLISH
" to
"
"
EN 29