Replacement of parts (Electrical Controls)
COOKER
FIG. 28
TIMER
TO FIT NEW FLUE SAFETY DEVICE
ENSURE THAT ALL ELECTRICAL SUPPLIES TO THE
APPLIANCE HAVE BEEN TURNED OFF.
SEE FIG. 28
Follow instructions in section BURNER ACCESS Steps 1
to 3.
1. Remove 2 screws securing flue safety device bracket.
2. Withdraw thermostat and remove (2) push on
connectors.
3. Remove thermostat securing nut.
4. Remove phial guide bracket from tube.
5. Pull phial from securing clip and withdraw.
6. Fit replacement device and assemble in reverse order
of removal ensuring the phial is correctly located
within the tube and guide bracket is located under the
safety device fixing bracket.
THERMOSTAT
FIG. 29
43
OVERHEAT
THERMOSTAT
DESN 511444
RESET
BUTTON
DESN 511737