Table of Contents
Advertisement
BURNER ACCESS
- SEE FIG. 5
1. Open the burner access door.
2. Remove (5) inner panel securing screws and remove
panel.
3 Remove the (3) plinth securing screws and remove
plinth.
ELECTRICAL CONNECTION
- SEE FIG. 6
This appliance comes with a three-prong plug which
should be connected to a proper receptacle. See page 10
(Electrical). This is fitted internally to the terminal strip
shown in Fig. 6 and Fig. 7.
Installation Instructions
FIG. 5
FIG. 6
13
DESN 511424
DESN 512568
Advertisement
Table of Contents
