Table of Contents
Advertisement
INTRODUCTION
For continued safe and efficient operation of the range, it is important that servicing is carried out annually as
recommended by your Aga Distributor or local gas company. The Cookmaster should be turned OFF by the user the night
preceding the day of servicing so that the range will have cooled down by the following morning.
A HOT APPLIANCE CANNOT BE SERVICED.
DISCONNECT FROM ELECTRICITY SUPPLY BEFORE SERVICING.
WHEN RE-WIRING ANY ELECTRICAL COMPONENTS, REFER TO CIRCUIT DIAGRAM FIG. 32 . BEFORE
ELECTRICAL RE-CONNECTION, CHECK THAT THE APPLIANCE IS ELECTRICALLY SAFE.
NOTE: TURN OFF GAS SUPPLY TO THE APPLIANCE BEFORE SERVICING ANY GAS CARRYING COMPONENTS.
ALWAYS CHECK APPLIANCE FOR GAS SOUNDNESS AFTER COMPLETION.
SERVICE SCHEDULE
Annual Service
BURNER REMOVAL - for cleaning and inspection.
CLEANING - Heat exchanger flueways, ovens and hotplate flueways together with ceramic fibre burner chambers.
BURNER SERVICING
REPLACEMENT PARTS
Always test joints for gas soundness after reassembly.
32
Advertisement
Table of Contents
