Table of Contents
Advertisement
SEE FIG. 13
THE MINUTE TIMER
The minute timer works separately from the time of day clock and can be set to time periods from 1 minute to 23.59 hours.
Only a one handed operation is required.
SETTING THE MINUTE TIMER
1. Press the MINUTE TIMER
plus + and minus - buttons.
2. After 5 seconds the display will go back to showing the time of day, the bell symbol will remain steady and the set
time will immediately start to count down, by pressing the MINUTE TIMER
remaining.
3. At the end of the set time, a beep will sound (two signals followed by a pause), the bell symbol will flash and continue
for 2 minutes unless cancelled by pressing the MINUTE TIMER
4. The setting can be cancelled by pressing the MINUTE TIMER
0.00.
NOTE BEFORE USING THE FEATURES PLEASE READ THE USERS INSTRUCTIONS THOROUGHLY.
FIG. 13
THE MINUTE TIMER
button the bell symbol will be displayed and 0.00. Set the required time by using the
button the display will show the time
button or MANUAL
and minus - buttons and running the time back to
25
button.
DESN 512657
Advertisement
Table of Contents
