5.5 Installing the motor unit
N.B. the diagrams that follow show an outer view so as to make the (MD) right-hand gearmotor installation more intuitive.
- Place the gearmotor into the foundation box and fasten it with nuts and washers using the crow's foot wrench supplied and
the proper ratchet wrench.
- Fasten the tie rod between the motor support and the arm assembly with nuts and bolts in the proper holes.
Note: the arms are fi tted with several holes to enable different gate-leaf opening angles.
OPENING 90°
8
UNI 5588 M12
UNI 6592 Ø12
UNI 7474 M12
UNI 5739 M12x80
UNI 5739 M20x50
OPENING 95°