TechniSat DIGITRADIO 586 Manual page 68

15.3 Playing CDs
> Switch to CD player mode by pressing the MODE button.
> [CD] is shown on the display.
> Carefully insert the CD with the labelled side facing upwards. Ensure that the
CD is not positioned at an angle. The CD is automatically drawn in by the
DIGITRADIO 586.
> The data on the CD is scanned. [Reading] appears in the display. Playback
then begins with the first track (audio CD) or the first track in the first folder
(MP3 CD).
Do not perform any operation until the CD content has been completely read,
to ensure that all the required information on the CD has been read. This
process can take some time, particularly with MP3 CDs.
Please hold the CD by the edge when inserting/removing.
> By pressing the Play/Pause button
time flashes on the display), or continue playback by pressing it again.
> Use the Stop button
appears on the display.
Always stop playing a CD before removing it.
15.4 Picking a track
> Use the Previous Track
or previous track.
The display shows the respective folder [F] and track [T] number.
15.5 Quick search
While the track is playing, you can perform a quick search forwards or backwards to
find a specific section.
> Hold down the Previous Track
forwards or backwards quickly within a track for as long as the button is held
down.
68
, you can pause playback (the playing
to stop playback. The total number of tracks
or Next Track
or Next Track
buttons to skip to the next
buttons to skip