TechniSat DIGITRADIO 586 Manual page 54

6 Setting up the device
> Place the device on a firm, secure and horizontal surface. Make sure the area
is well ventilated.
Note:
- Do not place the device on soft surfaces such as carpets and blankets, or
near to curtains and wall hangings. These could obstruct the ventilation
openings. The necessary flow of air could be interrupted as a result. This
could potentially lead to fire in the device.
- Do not place the device near to sources of heat, such as radiators. Avoid
direct sunlight and very dusty environments.
- Do not select a location for the device with high air humidity, e.g. a kitchen or
sauna, since condensation could damage the device. The device is intended
for use in a dry environment and in a moderate climate and must not be
exposed to dripping or splashing water.
- Please note that the device feet could leave coloured marks on some types
of furniture surfaces in certain situations. Place a protective layer between
your furniture and the device.
- Keep the DIGITRADIO 586 away from devices that generate intense magnetic
fields.
- Do not place any heavy objects on the device.
- Route the mains cable in such a way that nobody can trip over it. Ensure that
the mains cable or the power supply unit are always easily accessible, so that
the device can be quickly disconnected from the power supply!
> To ensure connection to the mains, insert the plug fully into the socket.
> Use a suitable, easy-to-access mains connection and avoid using multiple
socket strips!
> In the case of malfunctions or detecting smoke or odour from the housing,
remove the plug from the power outlet immediately!
> Remove the plug if the device is not going to be used for a prolonged period,
e.g. before going away on a long trip.
54