TechniSat DIGITRADIO 586 Manual page 65

> In FM mode, hold down  or  for approx. 2 seconds to search
automatically for the next station with a strong enough signal.
If an FM station with sufficient signal intensity is found, the scan stops.
If an RDS station is being received, the station name is displayed and,
possibly, the radio text.
Please use the manual station scan for setting weaker stations.
Under Menu > Scan settings you can set whether the scan only finds strong
stations (Strong stations only). To do so press the MENU button and > Scan
settings > [Yes]. Confirm the selection with OK. As a result, the channel
search stops only for strongly receivable channels. Please use the manual
station scan for weaker stations.
13.5 Setting mono/stereo
> Press the MENU button and use  or  to select > Audio setting.
> Select [YES] for playback in mono sound only in the event of weak FM
reception.
> Confirm by pressing the OK button.
13.6 Saving FM stations
The favourites memory can store up to 12 stations.
Stored stations are retained even in the event of a power cut.
> Play the station you want.
> Press one of the number keys 1 ... 12 until [saved.] appears on the display.
> Repeat the procedure to save more stations
Alternatively:
> Press and hold the PRESET button on the device, select a favourite memory
location with the OK/SNOOZE knob and press the OK/SNOOZE knob to store
the station.
13.7 Selecting programmed stations
> Press the number key you want 1- 12. If there is no station saved in the
selected memory slot, [Not available] appears.
Alternatively:
> Press and hold the PRESET button on the device, use the OK/SNOOZE knob
to select a Favourites storage slot and then press the OK/SNOOZE knob.
DE
EN
FR
NL
65