TechniSat DIGITRADIO 586 Manual page 58

7.4.4 Adjusting the volume
> Adjust the volume using the Volume +/- (15) buttons on the remote control
or by rotating the VOLUME/
shown on the display.
7.4.5 Activating the mute function
> You can switch off the volume at the touch of a button using the MUTE
button (13).
This mode is indicated in the status bar by a corresponding icon.
> Pressing the MUTE button again switches the volume back on.
7.4.6 Accessing displays
> By repeatedly pressing the INFO (16) button during playback from a source,
the following information can be viewed and scrolled through.
7.4.7 Displays
Example:
Current source
Station name,
track, artist,
additional info,
menu, lists
The displays shown can vary depending on the selected function/source. Take
note of the instructions on the display.
8 Menu navigation
Menu navigation primarily takes place using the MENU/// and OK buttons
on the remote control.
The menu is divided into the respective submenu for the currently selected source
and the main menu. To navigate in submenus, select the corresponding item with
the arrow keys / and select/activate with the OK button or alternatively the 
button to call up/activate. "*" highlights the current selection.
You can go back one step by pressing the BACK or  button.
Closing the menu: Press the BACK or MENU button several times or wait for
approx. 15 seconds.
58
Knob (2) on the device. The set volume is
Time
Status bar with
reception strength
WLAN and DAB+/
FM, active alarm
clock, stereo/mono,
etc.