Precautions For Battery; Propellers - Hubsan ACE PRO User Manual

Table of Contents

Advertisement

to be different than the theoretical discharge capacity. It is recommended to
stop flying and land immediately when the APP prompts a "low battery alarm".
(4) In a low-temperature environment, due to the limitation of battery output
power, the wind resistance of the aircraft will be reduced. Please fly with caution.

1.2.5 Precautions For Battery

Be sure to fully charge each time before using the Intelligent Battery. Charge the
intelligent battery only with Hubsan supplied power adapter and intelligent
charging modules.
(1) After each flight, battery temperature maybe higher. Allow Intelligent
Battery to cool down to normal room temperature before charging.
(2) The charging temperature range of the intelligent battery is 5 ° C to 40 ° C. If
the temperature of the battery cell is not in this range, the battery management
system will stop charging. The optimal charging temperature range is 25 ± 3 ° C.
Charging in this temperature range can extend the battery life.
(3) When charging or installing, please do not hot plug the battery, which may
cause irreversible damage to the battery, so when pulling out or inserting the
battery from the charging head, charge manager or drone, please make sure the
battery is turned off properly.

1.3 Propellers

Before installing the propeller, please carefully check the letters by the aircraft
motors and the letters on the propeller. You must match those letters when
installing propellers; If the blade is damaged or needs to be replaced, unscrew
the screw counter-clockwise to remove the propeller.
Use only HUBSAN original Propellers, because it comes with loctite applied
screws to prevent accidental screw and propellers loose. (HUBSAN Standard
accessories come with original screws)
HUBSAN brand new propeller screws
come with blue loctite applied.
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hbs 001-2017Ace

Table of Contents