1.2.4
Pecautions fo low tempeatues
1.2.4
Pecautions fo low tempeatues
1 - If the battery is used in a low temperature environment (-10°C to 5°C), please fully
charge the battery and keep it warm before use.
2 - The battery cannot be used in an environment with a temperature lower than -10°C.
3 - In a low temperature environment, it is recommended to immediately stop the flight
when the APP communicates "Low battery alarm".
4 - In a low temperature environment, it is recommended to preheat the battery to 5°C
or above before flight.
5 - In low temperature environments, the wind resistance of the Drone will be reduced
due to the limitation of the battery output power. Please operate with caution.
6 - Before flying in a low temperature environment, it is possible to insert the battery
into the Drone after heating it for 1 or 2 minutes. Takeoff is possible after the battery
has warmed up.
1.2.5
Battey pecautions
1.2.5
Battey pecautions
Make sure to fully charge the battery each time before flying the Drone. The flight
battery must use a dedicated Hubsan power adapter for charging.
1 - If the temperature of the intelligent flight battery is high at the end of the flight it
must be cooled to room temperature before charging.
2 - The charging temperature range of the intelligent flight battery is 5°C to 40°C. If
the battery cell temperature is not in this range, the battery management system will
prohibit charging. The optimal temperature range for charging is 25 ± 3°C. Charging
in this temperature range can extend battery life.
1.2.6
The popelles
1.2.6
The popelles
Before installing the propeller, carefully check the letters next to the Drone's motor
and the letter engraved on the propeller. The two letters must match during installa-
tion. If the propeller blade is damaged it must be replaced, turn the screws counter-
clockwise to remove them.
The new propeller screws are supplied by
HUBSAN with thread locking glue (blue)
11