Charging And Installing The Aircraft Battery - Hubsan H122D Quick Start Manual

Charging and Installing the Aircraft battery

The H122D aircraft is paired with a rechargeable 7.6v, 710mAh Li-Po. Be
sure to use the provided Hubsan dedicated charger for charging. Fully
charge the battery before flight. Connect the charger's USB adapter to a
PC terminal and then the battery to the charger. Charging time is
approximately 130 min; recommended flight time is 6.5 minutes. Be sure
to charge the battery before each flight.
Installation: Push the battery into its compartment with its lines facing
away from the unit. Connect it to the drone's power line and coil the power
line into the compartment. Be careful to avoid entangling the power line
with the propellers.