Battery Installation - Hubsan H501S X4 AIR User Manual

7 Exit
8 Enter
9 Power Switch
10 Up / Down
11 T1, T2
12 Headless Mode
Switch
13 GPS Hold Mode
Switch
14 Return to Home
Mode Switch
15 Follow Me Mode
Switch
16 LCD Screen
17 2.4 Antenna
18 5.8 Antenna
19 Neck Strap Hook

2.4 Battery Installation

Open the battery
compartment hatch.
Do not mix new and old batteries
•
Do not cross-use different types of batteries at the same time
•
Long press to exit the Main Menu. Short press to take
photos / start and end video recordings.
Used to enter the Main Menu when the user holds the
throttle to its most downward position and while doing so
long presses the Enter key. Short press to start / stop
video recordings.
Push up / ON to turn on the transmitter. Push down / OFF
to turn off.
Up: Used to navigate the Main Menu. Also used to set a
new center for Orbit mode (short press once). Down: Used
to navigate the Main Menu. Also used to enter / exit Orbit
mode (long press once to enter or exit). To enter RSSI
mode, hold the Down key and then power the transmitter
on while doing so.
No Function
Flip the switch up to enter Headless Mode. Flip down to
exit Headless Mode.
Flip the switch up to activate GPS function. Flip down to
disactivate GPS function.
Flip the switch up to activate Return to Home Mode. Flip
down to exit Return to Home Mode.
Flip the switch up to activate the Follow Me function.
Displays the aircraft's current status, telemetry and live
video transmission (FPV).
Transmits flight control signal and commands.
Receives live video signal.
Attach your neck strap to this hood for use.
Connect the battery cable
14
Put the battery in the
compartment and organize
the cables then close the
compartment