Table of Contents
Advertisement
S/N Key / Switch
Custom keys
10
Charging /
11
Adapter Port
Low Battery
12
Warning
Standby
13
Protection
Low
14
power mode
Function
Long press the Fn+ wheel to adjust the zoom function.
Press and hold the Photo+ wheel to adjust the bright-
ness of the remote control screen.
When the drone is not taking off, press the Fn button
and the Video button for more than 3 seconds to
activate the remote control code pairing operation.
The remote control buzzer beeps when a low battery
is triggered or Return to home is activated. Press the
F n b u t t o n f o r 1 . 5 s e c o n d s , t o s t o p b e e p i n g
prompts.
Long press the Fn button again 1.5 seconds to restart
the beeping prompts.
Custom keys, set the function on the APP and save it
when the APP is not connected, [short press] Fn won't
work.
Function one: Exit the current flight mode.
In this mode, short press Fn to exit the current flight
mode and the aircraft will hover.
Function two: short press Fn to execute gimbal return
to normal state.
Function three: no function (factory default function)
Charge the remote control or connect with a mobile
device
Low battery warning for remote control： Remote
control"Beeps"
<25%, di~di~, interval 10s
<15%, di~di~, interval 2s
<10%, didi~didi~, interval 1s
If Remote controller is left on and unused, it will start
beeping once every 3 seconds and switch to stand
by mode. After 3 minutes of beeping, remote control
will automatically shut down
When the battery power is lower than 10%, the
remote control will enter low power mode, at this
time the remote control will cut off the power of the
USB Host, the communication between the phone
and the remote control will be disconnected, but the
communication between the remote control and the
drone will not be affected.
8
Advertisement
Table of Contents
