Line Fly Mode - Hubsan ACE PRO User Manual

If the aircraft is not in the starting position, the aircraft will fly to the starting
waypoint position before starting this function.

4.6.4 Line Fly Mode

Tap on "Mode Selection" then "Line Fly Mode".Set the angle,distance and
speed of the aircraft.
Performance requirements:
1. Set the angle (0 ~ 360 °, accuracy 1 °);
Set the distance (10-6000 meters, accuracy 1 meter);
Set the speed (1-8 m / s, accuracy 0.1);
2. Once setup is complete, the aircraft will execute Line Fly mode.
During the flight, pilots can take photos or videos manually , or pause /
resume / stop the flight at any time.
During the flight, you can control the altitude only.
3. You can pause/resume/stop the flight at any time.
4. When the aircraft is low on battery or lost connection from radio, aircraft
will always return to home.
N
Waypoint
Waypoint
Waypoint
Planning
Tap one and enter into
the operation interface
4 5 . 8 7 7 5 0 3 , - 1 0 6 . 1 2 3 9 8 4
4 5 . 8 7 7 5 0 3 , - 1 0 6 . 1 2 3 9 8 4 ， 6 5 m
Line Fly Mode
Line Fly Mode
0
Angle
0 °
1 0
Distance
1 0 m
Relative
0
Altitude
0 m
1 . 0
Speed
1 m / s
4 5 . 8 7 7 5 0 3 , - 1 0 6 . 1 2 3 9 8 4
S P E E D 0 . 0 M / S
Preview Route
H : 0 . 0 m
4 5 . 8 7 7 5 0 3 , - 1 0 6 . 1 2 3 9 8 4 ， 6 5 m
23
1.0x
Waypoint
Memory
S P E E D 0 . 0 M / S
H : 0 . 0 m D : 0 . 0 m
T: 0 % R : 0 %
E : 0 % A : 0 %
3 6 0 °
6 0 0 0 m
1.0x
3 0 0 m
8 m / s
S P E E D 0 . 0 M / S
H : 0 . 0 m D : 0 . 0 m
D : 0 . 0 m
1 0 0 %
1 0 0 %