Tf Card; Faq - Hubsan ACE PRO User Manual

Transmitter Adjustment
You can adjust the angle of gimbal pitch
by fiddling with the control thumb-wheel
of gimbal pitch.

4.7.1 Tf Card

(1) support TF card, U3 above 16G/32G/64G/128G;
(2) hot plug is supported. You can insert the TF card even if drone is powered on.
But it is recommended to plug in the TF card when drone is powered off.

FAQ

1.The mobile device and remote control cannot be connected
(1) Check whether the status of the APP control signal icon has changed
(2) For USB Settings on android phones, check out "Android phone connection
tutorial"
2. Aircraft ID not available.
(1) Restart the drone, remote control and X-HUBSAN 2.0 APP
(2) Update the aircraft firmware
(3) Check whether the LED next to TF card slot of the drone is on in red, if it
flashing, means the aircraft function is abnormal
3. FPV transmission freezing, gets stuck or easy to disconnect
(1) Adjust the antenna Angle and point vertical side of the antennas to the
aircraft, without anything blocking between antennas
(2) Change the flight site, please do not fly near tall buildings, or near signal tower
(3) Update the latest firmware
4.Abnormal aircraft hovering
(1) Change the flight site, please do not fly near tall buildings and signal towers
(2) Do the compass calibration and horizontal calibration
(3) Wind is too strong to affect the flight
5. Aircraft GPS accuracy is not precise or cannot pass the GPS accuracy test
(1) in the open area of the outdoor with GPS over 6 satellite
(2) Walk around near the aircraft
(3) Replace the mobile device
28