Chapter 5. Diagnostics And Check Items - Sharp SL-5500 Service Manual

PC-UM10M

CHAPTER 5. DIAGNOSTICS AND CHECK ITEMS

When diag are executed, data of user will be cleard.
If you need the data, you must transfer the data before starting diag.
1. DIAG MENU
DIAG MENU (1/3)
Page down Page up
1. COM ADJ setting
2. AGING
When the machine is
3. Battery Voltage Adjust
reset while "Boot Flag:"
is displayed, the OS booted.
4. Touch Panel
5. LCD+LED
6. IrDA
When the machine is
7. Main Keyboard reset while "Boot Flag:Diag"
is displayed, the Diag booted.
8. Slide Keyboard
9. Earphone
10. Front Light
Indicate the
---
Boot Flag : V :
ROM Version
AIN1(B/U) : CF CD :H
AIN1(Main) : SD CD :H
AIN0 : SD WP :H
Indicates status of
Tablet :X M.B.L : battery voltage or battery
replacement SW.
COM :X Version
When a value is set, the
AIN1 (B/U): Backup battery voltage
display is as follows:
AIN1 (Main): Main battery voltage
Tablet: 0
AIN0: Battery pac k presence/absence
COM: Set value
If there is no set value: X
DIAG MENU (3/3)
Page down Page up
1. Irda Checker
2.
4. Clear Diag Flag
5.
6.
7. CF Update
8.
9.
10. Normal Diag Mode
---
Boot Flag : V :
AIN1(B/U) : CF CD :H
AIN1(Main) : SD CD :H
AIN0 : SD WP :H
Tablet :X M.B.L :
COM :X Version
Entering the DIAG mode: Press and hold [P] and [D] keys, and press FULL RESET button simultaneously.
Key operations
Slide key Main key
Cancel (on/off)
Cursor upper
Cursor lower
Cursor right
Cursor left
OK ENTER
1
Cursor key center
Contact + OK Fn + ENTER
Front Light
1,2,.....9,0
When the Normal Diag Mode (Diag Menu (3/3) No. 10) is executed, if "Full reset" is made, the diag is booted.
To boot the OS, execute Clear Diag Flag (Diag Menu (3/3) No.4).
DIAG MENU (2/3)
Page down Page up
1. Idle mode
2. 16pin
---
3. SD Card
4. Low Battery
5. RAM
6. Compact Flash
7. Flash (SUM)
8. Sounder
9. Remocon
10. Charge
---
Boot Flag : V :
AIN1(B/U) : CF CD :H
AIN1(Main) : SD CD :H
AIN0 : SD WP :H
Tablet :X M.B.L :
COM :X Version
Turns on the power.
A Shifts the selected menu item upward.
D Shifts the selected menu item downward.
B Refer to the next page
L Refer to the previous page.
Starts the selected check
Interrupts the check under process and returns to the menu.
Writes the set value while the common voltage is being adjusted.
Turns on/off the Front Light. (Toggle operation)
Selects and execute the menu.
SL-5500 DIAGNOSTICS AND CHECK ITEMS
Operation
– 50 –
Effective only on the menu display.
Effective only on the menu display.
Effective only on the menu display.
Effective only on the menu display.
Effective only on the menu display.