Sharp SL-5500 Service Manual page 42

PC-UM10M
8. Key PWB Shielding Sheet attachment
(1) Clean and remove oil with IPA from the contact pins of the
PWB.
(2) Separate the Separation Paper of the Shielding Sheet.
(3) Fit the right and left notches of the Shielding Sheet with the cab-
inet pawl which are engaged with the PWB.
Note: Be careful that the sheet must not cover the cabinet pawl
and screws.
Corner attachment reference
Corner attachment reference
Corner attachment reference
Corner attachment reference
SL-5500 DISASSEMBLY AND ASSEMBLY
– 41 –
9. Sliding Sheet A (x 2) attachment
(1) Separate the Sliding Sheet from the Mount Sheet.
(2) Attach the sheet according to the attachment reference of the
Shielding Sheet.
Attachment reference: X direction: Inside reference
(3) After attaching, press the Sliding Sheet along the shape of the
Shielding Sheet.
Note: Check that the Sliding Sheet does not cover the Shielding
Sheet attachment reference. If it does, push away with a
stick, etc.
-0.1
+0
-0
Attachment reference
Must not cover the steps of the
PWB Shielding Sheet.
10. Slide Cover Panel Fixing Tape (x 2) attachment
(1) Clean and remove oil with IPA from the Fixing Tape Attachment
section of the Slide Cover Panel.
(2) Separate the Slide Cover Panel Fixing Tape from the Mount
Sheet.
(3) Attach the Slide Cover Panel Fixing Tape to the Slide Cover
Panel.
Note: Attach the tape so that it does not cover the rib.
Y direction: Lead edge of the projec-
t i o n o f t h e S h i e l d i n g
Sheet
+0.5
-0
Attachment reference
+0.1
Attachment reference