Sharp SL-5500 Service Manual page 43

11. Slide Cover Panel attachment
(1) Clean and remove oil with IPA from the Slide Cover Panel
attachment surface of the Slide Cover Cabinet.
(2) Separate the Slide Cover Panel Fixing Tape from the Separa-
tion Sheet.
(3) Assembly the Slide Cover Panel by inserting the Slide Cover
Panel Pawls 8x 4) into the Slide Cover Cabinet holes 8x 4).
(4) Press and fix the Slide Cover Panel Fixing Tape.
Note: (1) When pressing and fixing the Slide Cover Panel, do
not touch the Key PWB contact surface on the back.
(2) Be sure to separate the Duplex Tape Separation
Sheet.
4. UPPER CABINET AND OTHERS
DISASSEMBLY AND ASSEMBLY
[NOTE FOR ASSEMBLY OF THE UPPER CABINET UNIT]
1. Tablet Upper Mask attachment
(1) Tablet Upper Mask attachment
Clean and remove oil with IPA from the attachment section of
the Tablet Upper Mask on the back of the Upper Cabinet. Attach
the Tablet Upper Mask to the Upper Cabinet along the step on
the back with the notch section at the right upper side. After
attachment, press the attached section to ensure attachment.
Note: (1) Adhesive is pasted only to the half of the width of the
mask. Be careful of the attachment direction.
(2) Attachment deflection reference:
X direction: +0.1mm
–0.0mm (Must not extend over the step.)
Y direction: +0.0mm (Must not extend over the step.)
–0.1mm
+0
-0
Attachment reference
(Y direction)
-0.1
a
a - a cross section
OK
NG
C surface
(Attachment direction mark)
+0.1
Tablet upper mask
a
SL-5500 DISASSEMBLY AND ASSEMBLY
– 42 –
2. Fixing Key Panel attachment
Clean and remove oil with IPA from the attachment section of the
Fixed Key Panel of the Upper Cabinet. Attach the Key Panel with-
out extending over the cabinet.
Note: (1) Must not extend over the cabinet.
(2) Do not break the pawls when separating the Separa-
tion Sheet of the Fixed Key Panel.
3. LED Indicators (x 2) attachment
Insert the LED Indicators (x 2) from the front surface of the Upper
Cabinet.
Note: Insert the LED Indicator completely so that it is aligned with
the Upper Cabinet.
PC-UM10M