Philips AVENT SCF883 Manual page 33

Problem
Steam is leaking
from the water
tank.
The ingredients
are not completely
heated through.
The jar lid leaks.
Possible cause
The water tank lid is not
closed correctly.
The jar is not assembled
correctly on the main
unit.
The steam outlet on the
water tank lid is blocked
by contamination or
limescale buildup.
The steam inlet on the
jar lid is blocked by
contamination�
The pieces in the jar are
too big.
There is too much food
in the jar.
There is too much or too
little water in the water
tank.
The steaming time is too
short.
The jar is not placed on
the main unit correctly.
There is too much
limescale buildup in the
water tank.
There is too much food
in the jar.
The jar lid is not locked
onto the jar correctly.
Solution
Close the water tank lid correctly. Make
sure the
lined up with the
tank.
Place the jar correctly on the main unit.
Clean the steam outlet on the water tank
lid.
Clean the steam inlet on the jar lid.
Cut the food into smaller pieces (cubes no
bigger than 1 cm).
Decrease the amount of food in the jar.
Add the correct amount of water
according to the steaming time. Check
the recipe booklet and/or the table in
the chapter "Ingredients and steaming
time" to make sure that you add the
correct amount of water according to the
steaming time for the ingredients you
want to steam or the recipe you want to
prepare.
Select a longer steaming time (30 minutes
tops).
Place the jar on the main unit correctly
with the jar lid on the bottom.
Descale the water tank. Refer to the
section "Descaling" in the chapter
"Cleaning and descaling".
Switch off the appliance and process a
smaller quantity.
Place the jar lid on the jar and turn it
clockwise to close it securely.
- English 31 -
icon on the water tank lid is
icon on the water