Yamato IN602CS Instruction Manual page 19

Programmable low temperature incubator
Table of Contents

Advertisement

Fixed Temperature Operation
3
Set temperature
FIXED TEMP
AUTO STOP
AUTO START
PROGRAM
STANDBY
END
HEATER
FUNCTION
PROGRAM
REFRIGE
FIXED TEMP
AUTO STOP
AUTO START
PROGRAM
STANDBY
END
HEATER
FUNCTION
PROGRAM
REFRIGE
4
Start operation
FIXED TEMP
AUTO STOP
AUTO START
PROGRAM
STANDBY
END
HEATER
FUNCTION
PROGRAM
REFRIGE
Set TEMP
0.0 ℃
Fixed TEMP OPR
TROUBLE
MENU
ENTER
CANCEL
Set TEMP
37.0 ℃
Fixed TEMP OPR
TROUBLE
MENU
ENTER
CANCEL
37.0 ℃ ↑
Set TEMP
Fixed TEMP OPR
TROUBLE
MENU
ENTER
CANCEL
POWER
① The
setting
displayed.
TEMP" and the numeric character that indicates
DEFROST
temperature blinks.
② Set the temperature using the "▲▼".
POWER
③ Press the ENTER key to decide the temperature
and start the fixed temperature operation.
CAUTION!
DEFROST
The refrigerator operation can not be performed
again for five minutes just after an operation stop.
POWER
The refrigerator has been in the standby state and
the REFRIGE lamp blinks during the period.
① The blinking FIXED TEMP lamp lights on when
the fixed temperature operation starts. The unit
starts to control temperature according to the
DEFROST
setting temperature.
on when the heater is on and The REFRIGE lamp
POWER
lights on when the refrigerator is on.
② The Sub Display displays the setting temperature.
The
arrow
temperature control is also displayed with
blinking.
The direction of arrow shows as
follows depending on the relation between the
setting temperature at operation start and that in
furnace.
Set TEMP
2002/01/01
(When setting temperature is
higher than temperature in
furnace)
③ The direction of arrow shows as shown below
when the temperature in furnace reaches to
within ±1.0
Set TEMP
(When temperature in furnace
reaches
temperature)
④ Press the POWER key to stop operation.
16
Operation Method
temperature
input
The Sub Display indicates "Set
The HEATER lamp lights
which
indicates
the
37.0℃↑
Set TEMP
12:00
2002/01/01
(When setting temperature is
lower
than
furnace)
of setting temperature.
37.0℃→
2002/01/01
12:00
to
around
setting
screen
is
state
of
37.0℃↓
12:00
temperature
in

Advertisement

Table of Contents
loading

Table of Contents