Yamato IN602CS Instruction Manual page 37

Program Creation Example
25 Set the "No" using the "▼▲".
26 Press the ENTER key to decide the setting.
27 Press the PROGRAM key until the "Set TEMP" in the Step 3 is
displayed. The display on the lower column changes from "S02"
to "S03"or to "SO3 (un-used)".
Press the ENTER key to display the setting temperature edition
28
screen. The cursor goes out and the setting temperature blinks.
29 Set the temperature to -10
30 Press the ENTER key to decide the temperature.
31 Press the PROGRAM key to display the "Set time" selection
screen.
32 Press the ENTER key to display the setting period edition screen.
The cursor goes out and the setting period blinks.
33 Set the period to 15 min using the "▼▲".
34 Press the ENTER key to decide the period.
35 Press the PROGRAM key to display the "Rep. start".
36 Press the ENTER key to display the repeat initiating step edition
screen. The cursor goes out and the setting for repeat initiating
step blinks.
37 Set "S02" using the "▼▲".
38 Press the ENTER key to decide the setting.
using the "▼▲".
℃
34
Operation Method
Rep. start ► No
S02
Rep. start ► No
S02
Set TEMP ► 0.0℃
S03
Set TEMP 0.0℃
S03
Set TEMP -10.0℃
S03
Set TEMP ► -10.0℃
S03
Set time ► 0min
S03
Set time 0min
S03
Set time 15min
S03
Set time ► 15min
S03
Rep. start ► No
S03
Rep. start No
S03
Rep. start S02
S03
Rep. start ► S02
S03