Yamato IN602CS Instruction Manual page 38

Program Creation Example
39 Press the PROGRAM key to display the "Rep. count".
40 Press the ENTER key to display the setting for repeat count
edition screen. The cursor goes out and the repeat count blinks.
41 Set "1" using the "▼▲".
42 Press the ENTER key to decide the setting.
43 Press the PROGRAM key until the "Set time" in the Step 4 is
displayed. The display on the lower column changes from "S03"
to "S04"or to "SO4 (un-used)".
44 Press the ENTER key to display the setting period edition screen.
The cursor goes out and the setting period blinks.
45 Display the "End" using the "▼▲".
46 Press the ENTER key to decide the setting.
47 Press the PROGRAM key until the "Program End" in the Step 4 is
displayed.
48 Press the ENTER key to register the program and return to the
standby state.
35
Operation Method
Rep.count ►Endless
S03
Rep. count Endless
S03
Rep. count
S03
Rep.count ► 1
S03
Set time ► 0min
S04
Set time 0min
S04
Set time End
S04
Set time ► End
S04
Program End
S04
Standby
2002/01/01 12:00
1