Table of Contents
Advertisement
CSR Commands
Step 11
To display a log of actions used to process the test results, click Show Log. The following screen appears
(Figure4-41 "Log Entries Generated by the CSR Commands
Figure4-41 Log Entries Generated by the CSR Commands Tab
The log messages, normally routed to syslog, are logged to the database. The logging level is set to
Informational for all test requests. See
The following sections describes other CSR functionalities in the CSR Commands tab in the CSR
window.
Updating Logging Level
To specify the logging level, click Update Logging Level.
Loading the Active Dataset
To load the active dataset into memory for use, click Load Active Dataset. Because calls are always in
progress, both datasets can be in use simultaneously. Calls currently in progress use the old dataset and
new calls use the new dataset.
Cisco Carrier Sensitive Routing User Guide
4-44
Tab"):
Appendix A , "Logging"
for more detail on syslog.
Chapter4
CSR GUI Functionalities
Advertisement
Table of Contents
