Modifying Gatekeepers - Cisco PXM Version 1.1 User Manual

Chapter4 CSR GUI Functionalities

Modifying Gatekeepers

This section describes how to modify an existing gatekeeper.
Step 1
Select a gatekeeper from the gatekeeper list in the Current Gatekeepers area, as follows (
"Current Gatekeepers Area in CSR
Figure4-11 Current Gatekeepers Area in CSR Window
Step 2
Click Modify. The following dialog box appears (
Box for an Existing
Window").
Gatekeeper").
Figure4-12 " Registered Messages and Filters Dialog
Cisco Carrier Sensitive Routing User Guide
Configuring CSR with the GUI
Figure4-11
4-9