Creating, Modifying, And Deleting Contact Lists; Creating Contact Lists - Cisco PXM Version 1.1 User Manual

Chapter4 CSR GUI Functionalities
Step 2
In the Contacts area, click a contact. You can select more than one contact by holding down the Ctrl key
while clicking each contact.
Step 3
Click Delete . A Delete message appears:
Step 4
Click Yes to delete the contact, or click No to stop the deletion.
Note

Creating, Modifying, and Deleting Contact Lists

This section describes the steps to create, modify, and delete Contacts Lists.

Creating Contact Lists

Step 1
In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select
Contact Lists from the pull-down menu.
Step 2
Click New
Dataset"):
Figure4-23 Dialog Box for New Contact List in Active Dataset
Alternatively, you can delete a contact by clicking Delete when you are in the screen for
modifying the contact.
.
The following dialog box appears ( Figure4-23 "Dialog Box for New Contact List in Active
Cisco Carrier Sensitive Routing User Guide
Updating Active Datasets
4-19