Chapter4
CSR GUI Functionalities
Adding, Modifying, and Removing Gatekeepers
To add, modify, and remove gatekeepers, log in to CSR and select the Configuration Management tab in
the CSR window. Use the Current Gatekeepers area on the screen to add, modify, or remove gatekeepers.
Adding Gatekeepers
This section describes the steps to add a gatekeeper and its associated messages and filters.
Step 1
To add a gatekeeper, click Add in the Current Gatekeepers area. The following dialog box appears
(Figure4-4 "Registered Messages and Filters Dialog Box for a New
Figure4-4
Registered Messages and Filters Dialog Box for a New Gatekeeper
Configuring CSR with the GUI
Gatekeeper"):
Cisco Carrier Sensitive Routing User Guide
4-5