Deactivating Csr - Cisco PXM Version 1.1 User Manual

Chapter3 Cisco Carrier Sensitive Routing Application Operations

Deactivating CSR

To stop CSR, log in to the CSR GUI by performing the following steps:
Step 1
At the system prompt, enter the following command:
/usr/local/csr/gui/csrgui &
The login dialog box in
Figure3-1
Step 2
Enter the information on the Login screen as follows:
a.
b.
c.
d.
e.
f.
F i g u r e 3 - 1 'Login Dialog Box"
Login Dialog Box
Enter the user name. The range is 1 to 32 characters.
Enter the password. The range is 1 to 32 characters.
Enter the host name that is the location of the database. This can be a remote or local host. The range
is 1 to 32 characters.
Enter port number. This is the port on the system for the database connection. The range is 1 to
32767.
Enter DB Name. This is the name of the database to be connected to. The range is 1 to 32 characters.
Click Login.
If login is successful, the CSR window in
failure message appears and the Login dialog box reappears. The user is limited to three login
attempts, then the GUI shuts down. See
appears.
Figure3-2 "CSR Window"
Chapter4, "CSR GUI Functionalities".
Cisco Carrier Sensitive Routing User Guide
Deactivating CSR
appears. Otherwise, a login
3-3