Table of Contents
Advertisement
Configuring CSR with the GUI
Step 2
Enter the information in the Login dialog box as follows:
a.
b.
c.
d.
e.
f.
If the login is successful, the CSR window appears. Otherwise, a login failure message appears and the
Login dialog box reappears. After three unsuccessful login attempts, the GUI shuts down.
Alternatively, click Cancel to exit from the GUI.
Note
Configuring CSR with the GUI
This section describes how to use the Configuration Management tab in the CSR window for the
following purposes:
•
•
•
Changing Configuration Settings
To change configuration settings, log in to CSR and click the Configuration Management tab in the
CSR window. When the following screen
Window") appears, use the Configuration Settings area on the screen to make changes.
Cisco Carrier Sensitive Routing User Guide
4-2
Enter the user name. The range is 1 to 32 characters.
Enter the password. The range is 1 to 32 characters.
Enter the host name where the database is located. This can be a remote or local machine. The range
is 1 to 32 characters.
Enter the port number. This is the port on the system for the database connection. The range is 1 to
32767.
Enter the DB Name. This is the name of the database to be connected to. The range is 1 to 32
characters.
Click Login.
Information from the last successful login is saved to the CSRLoginProperties file in the
current working directory. When the Login dialog box appears next time, the login
information, excluding the password, is displayed.
Changing Configuration Settings, page 4-2
Adding, Modifying, and Removing Gatekeepers, page 4-5
Swapping Datasets , page 4-12
(Figure4-2 "Configuration Management Tab in CSR
Chapter4
CSR GUI Functionalities
Advertisement
Table of Contents
