Modifying Contact Lists - Cisco PXM Version 1.1 User Manual

Updating Active Datasets
The key shown on the screen is the primary key of this contact list in the Contact List table. When a new
contact list is being created, "%%%%" is displayed.
Step 3
In the Contact List Name box, enter the name of the contact list. The range is 1 to 64 characters.
Step 4
In the Available Contacts box, you can select a contact and click Add to add that contact to the
Associated Contacts box.
Step 5
In the Associated Contacts box, you can select a contact and click Remove to remove that contact from
the box and return it to the Available Contacts box.
Step 6
Click Add to add this contact list, or click Cancel to exit.

Modifying Contact Lists

Step 1
In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select
Contact Lists from the pull-down menu.
Step 2
In the Contact Lists area, select a contact list by double-clicking on that contact list. Contact list
information similar to the following appears
Active
Figure4-24 Dialog Box for an Existing Contact List in Active Dataset
Step 3
Change the information accordingly.
Cisco Carrier Sensitive Routing User Guide
4-20
Dataset"):
(Figure4-24 "Dialog Box for an Existing Contact List in
Chapter4 CSR GUI Functionalities