Deleting Ingress Route Attributes - Cisco PXM Version 1.1 User Manual

Chapter4 CSR GUI Functionalities
Figure4-29 Dialog Box for an Existing Ingress Route Attribute in Active Dataset
Step 4
Change the information accordingly.
Step 5
Click Modify to save the changes, or click Cancel to leave the changes.

Deleting Ingress Route Attributes

Step 1
In the Active Dataset tab in the CSR window, click the down arrow in the Selection box, then select
Ingress Route Attributes from the pull-down menu.
Step 2
Click the down arrow in the Carriers box, then select the appropriate carrier from the pull-down menu.
Step 3
In the Ingress Route Attribute list, select an attribute. You can select more than one attribute by holding
down the Ctrl key while doing the mouse-click.
Step 4
Click Delete .
A Delete message appears.
Step 5
Click Yes to delete the attribute, or click No to stop the deletion.
Updating Active Datasets
Cisco Carrier Sensitive Routing User Guide
4-29