Route Processor Card Leds - Cisco 8800 Series Hardware Installation Manual

Route Processor Card LEDs

Table 15: Fan Tray LED Descriptions
LED
ATTN
(Attention)
FT STS
FC STS
Route Processor Card LEDs
The Route Processor LEDs are located on the front of the module.
Hardware Installation Guide for Cisco 8800 Series Routers
80
Color Status
Flashing Blue The operator has activated this LED to identify the fan tray in the chassis.
Off The operator had not activated the LED to identify the fan tray in the
chassis.
Amber The fan tray is powered on.
Green The fan tray is operational.
Amber If P2PM link goes down or if P2PM link is up, watchdog timer is enabled
and the timer get is expired.
Flashing Minor, major or critical alarm.
amber
Red The FPD upgrade in-progress.
Off No power to the fan tray.
Amber The fabric card is powered on and is in one of the following states:
• Either one or more fabric cards behind this fan tray is not operational.
• Either one or more fabric cards behind this fan tray have major or
critical alarm.
• NPU detecting failure on any of the fabric cards behind this fan tray.
Green • One of the fabric modules is operational and other one not present.
• Both fabric cards behind this fan tray are operational.
Off If both the fabric modules behind this fan tray are plugged out (or not
present).
LEDs