Advertisement
3
Run the Demonstration
Apply power to the ECP5 VIP Processor Board using 12 V adaptor.
„
Connect jumpers to the Crosslink and ECP boards as follows:
„
AR0234 Sensor Board
Jumper Name
J7
J8
CrossLink VIP Input Bridge Board
Jumper Name
J4
J30
J2
-
Connect HDMI monitor to the board using HDMI cable.
„
Toggle the button "SW3 (SYS_RST)" on Crosslink VIP Bridge Board.
„
Sensor captured video will be displayed on the HDMI monitor.
„
4
Done!
Apply power to the ECP5 VIP Processor Board using 12 V adaptor. Congratulations! You
have successfully demonstrated the hardware setup and programming procedure for
testing the operation of AR0234 Sensor Board using Lattice EVDK. To learn more about
these solutions and download full documentation for this kit, including schematics for all
the boards, visit the Lattice website at: www.latticesemi.com/mVision-AR0234-board
Additional Terms and Conditions Applicable to Lattice Programming and Development Hardware
Lattice device programmers, programming cables, socket adapters, and other hardware sold for use in conjunction with Lattice
software ("Programming Hardware") and Lattice evaluation boards and development kits sold for use in conjunction with
evaluating Lattice products ("Development Hardware") are designed and intended for use solely with semiconductor components
manufactured by Lattice Semiconductor Corporation. Programming and Development Hardware is warranted to meet Lattice
specifications only for a period of ninety (90) days; in all other respects the terms and conditions of sale of Programming and
Development Hardware shall be Lattice's standard terms and conditions set forth in Lattice's Sales Order Acknowledgment.
Additionally, Lattice specifications for Programming and Development Hardware limit their use to low-volume engineering
applications only, and not for volume production use. The warranty for Programming and Development Hardware will not apply to
any Programming or Development Hardware used in production, used with worn or improperly installed hardware, or used with
incompatible systems or components.
Technical Support
www.latticesemi.com/support
Copyright © 2022 Lattice Semiconductor Corporation. Lattice Semiconductor, L (stylized) Lattice Semiconductor Corp., Lattice
(design) are either registered trademarks or trademarks of Lattice Semiconductor Corporation in the United States and/or other
countries. Other product names used in this publication are for identification purposes only and may be trademarks of their
respective companies.
QS065 V1
January 2022
Lattice mVision AR0234 Sensor Board
Description
Short
Short
Description
Short
Open
Short
All other headers
should be kept open
AR0234 Sensor Board
Jumper Name
J55
J51
J5
J9
J6
J3
J50
J7
J52
1-2 (SPI), 2-3 (JTAG)
J53
All other headers
-
should be kept open
Description
2-3
1-2
1-2
1-2
1-2
1-2, 5-6
1-2, 5-6
2-3
1-2
Advertisement
