Locating The Software And Examples; Software Locations - National Instruments PXIe-5663E Getting Started

Hide thumbs Also See for PXIe-5663E:

Table of Contents

5. Associate the hardware modules that comprise your device.

1. Select the NI 5601 that is identified as not configured in the

configuration tree.

2. In the Associated Devices section, select the appropriate module from

each system component drop-down listbox.

For the NI 5663E, you must associate the NI 5622 IF digitizer module and

the NI 5652 LO source module with the NI 5601 RF downconverter.

3. Click Save in the MAX toolbar.

Note

to different chassis slots.

6. Self-test the device modules by selecting the modules in the configuration

tree, and clicking Self-Test in the MAX toolbar. Repeat this step for all

modules in your NI 5663E system.

The MAX self-test performs a basic verification of hardware resources.

Table 13. Locations of NI-RFmx Software

ADE

LabVIEW

LabWindows/CVI

Microsoft Visual C/C++ Use the header files located in the

Module associations may be lost when you move the modules

Location

Available on the LabVIEW Functions palette at Measurement I/O > NI-

RFmx.

NI-RFmx functions are available from the LabWindows/CVI Library menu

at Library > RFmx SpecAn Library and Library > RFmx Demod Library.

<NIDir>\Shared\ExternalCompilerSupport\C\include directory and import

library files located in one of the following directories:

Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit)—

■

<NIDir>\Shared\ExternalCompilerSupport\C\include

Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit):

■

32-bit installation—

■

<NIDir>\Shared\ExternalCompilerSupport\C\lib32\msvc

PXIe-5663E Getting Started

Table of Contents