Table of Contents
Advertisement
Quick Links
GETTING STARTED GUIDE
NI PXIe-5663E
6.6 GHz RF Vector Signal Analyzer with Digital Downconversion
Note
Before you begin, install and configure your chassis and controller.
This document explains how to install, configure, and test the NI 5663E. The NI 5663E is a
modular 6.6 GHz RF vector signal analyzer (VSA) with digital downconversion. The
NI 5663E ships with the NI-RFSA instrument driver, which you use to program the device.
You can also use NI-RFmx, available at ni.com/downloads, to program the device.
The NI 5663E comprises the following devices:
•
NI PXIe-5601 (NI 5601) RF downconverter module
•
NI PXIe-5622 (NI 5622) IF digitizer module
•
NI PXIe-5652 (NI 5652) LO source module
Caution
manner not described in this document.
Hot Surface
temperatures and cause burns. Allow the NI 5663E to cool before removing it from
the chassis.
Contents
Electromagnetic Compatibility Guidelines............................................................................... 2
Verifying the System Requirements..........................................................................................2
Unpacking the Kit..................................................................................................................... 2
Verifying the Kit Contents................................................................................................ 4
Preparing the Environment....................................................................................................... 5
Choosing and Installing the Software....................................................................................... 5
Software Options...............................................................................................................5
Installing the Software...................................................................................................... 6
Installing the NI 5663E............................................................................................................. 7
Interconnecting the NI 5663E Modules............................................................................ 8
Configuring the NI 5663E in MAX........................................................................................ 18
The protection provided by this product may be impaired if it is used in a
If the NI 5663E has been in use, it may exceed safe handling
Advertisement
Table of Contents
Related Manuals for National Instruments PXIe-5663E
Summary of Contents for National Instruments PXIe-5663E
-
Page 1: Table Of Contents
GETTING STARTED GUIDE NI PXIe-5663E 6.6 GHz RF Vector Signal Analyzer with Digital Downconversion Note Before you begin, install and configure your chassis and controller. This document explains how to install, configure, and test the NI 5663E. The NI 5663E is a modular 6.6 GHz RF vector signal analyzer (VSA) with digital downconversion. -
Page 2: Electromagnetic Compatibility Guidelines
To prevent electrostatic discharge (ESD) from damaging the device, ground yourself using a grounding strap or by holding a grounded object, such as your computer chassis. Touch the antistatic package to a metal part of the computer chassis. 2 | ni.com | NI PXIe-5663E Getting Started Guide... - Page 3 Do not install a device if it appears damaged in any way. Unpack any other items and documentation from the kit. Store the device in the antistatic package when the device is not in use. NI PXIe-5663E Getting Started Guide | © National Instruments | 3...
-
Page 4: Verifying The Kit Contents
5. Medium, Semi-Rigid SMA-to-SMA Cable, Labeled C, Part Number 198775A-01 12. NI PXIe-5663E Getting Started Guide (This Document) 6. Flexible SMA-to-SMA Cable, Part Number 190412B-03 13. Driver Software DVD 7. SMA Driver Bit, Part Number 190487A-01 4 | ni.com | NI PXIe-5663E Getting Started Guide... -
Page 5: Preparing The Environment
Choosing and Installing the Software Software Options NI provides several software options for the NI 5663E—NI-RFmx, the NI-RFSA instrument driver software, and the NI-RFSA Soft Front Panel (SFP). NI PXIe-5663E Getting Started Guide | © National Instruments | 5... -
Page 6: Installing The Software
Windows users may see access and security messages during installation. Accept the prompts to complete the installation. When the installer completes, select Restart in the dialog box that prompts you to restart, shut down, or restart later. 6 | ni.com | NI PXIe-5663E Getting Started Guide... -
Page 7: Installing The Ni 5663E
Ensure that the ejector handle is in the downward (unlatched) position. Place the module edges into the module guides at the top and bottom of the chassis. Slide the module into the slot until it is fully inserted. NI PXIe-5663E Getting Started Guide | © National Instruments | 7... -
Page 8: Interconnecting The Ni 5663E Modules
6 Interconnecting the NI 5663E Modules Caution The signal pins of this product's input/output ports can be damaged if subjected to ESD. To prevent damage, remove power from the product before 8 | ni.com | NI PXIe-5663E Getting Started Guide... - Page 9 If a cable bends due to incorrect alignment, remove the cable from the front panel connector and reconnect the cable center pin on the SMA cable to the SMA connector. NI PXIe-5663E Getting Started Guide | © National Instruments | 9...
- Page 10 If you are using an active device, such as a preamplifier or switch routed to the NI 5601 RF IN connector, ensure that the device cannot generate signal transients greater than the RF and DC specifications of the NI 5601 RF IN connector. 10 | ni.com | NI PXIe-5663E Getting Started Guide...
- Page 11 [+ 30 dBm MAX w/Attenuation] IF OUT + 20 dBm MAX LO IN 0 dBm NOM + 20 dBm MAX LO OUT 0 dBm NOM ALL PORTS ±5 VDC MAX 50 Ω NI PXIe-5663E Getting Started Guide | © National Instruments | 11...
- Page 12 LO signal when daisy-chaining the signal to other NI 5601 RF downconverters. When not in use, connect a 50 Ω termination load to LO OUT. 12 | ni.com | NI PXIe-5663E Getting Started Guide...
- Page 13 If the power supply fails, contact NI technical support. NI PXIe-5663E Getting Started Guide | © National Instruments | 13...
- Page 14 Figure 6. NI 5622 IF Digitizer Module Front Panel 16-Bit IF Digitizer ACCESS ACTIVE IF IN + 20 dBm MAX 50 Ω PFI 1 CLK IN 6.3 Vp-p 50 Ω CLK OUT 2 Vp-p 50 Ω SENSITIVE 14 | ni.com | NI PXIe-5663E Getting Started Guide...
- Page 15 CLK OUT This connector is the output terminal for the NI 5622 Reference Clock or Sample Clock. PFI 1 This connector receives a digital trigger from an external source. NI PXIe-5663E Getting Started Guide | © National Instruments | 15...
- Page 16 RED—The module has detected an error state. An error state may indicate the module has exceeded approved operating temperature and thermal shutdown has occurred or that the module has detected a power supply failure. If the power supply fails, contact NI technical support. 16 | ni.com | NI PXIe-5663E Getting Started Guide...
- Page 17 EMC performance. If this device has been in use, it may exceed safe handling temperatures and cause burns. Allow the device to cool before removing it from the chassis. NI PXIe-5663E Getting Started Guide | © National Instruments | 17...
-
Page 18: Configuring The Ni 5663E In Max
Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX informs other programs about which NI hardware products are in the system and how they are configured. MAX is automatically installed with NI-RFSA. Launch MAX. 18 | ni.com | NI PXIe-5663E Getting Started Guide... - Page 19 If an issue persists after you complete a troubleshooting procedure, contact NI technical support or visit ni.com/support. Interconnecting the NI 5663E Modules on page 8 Refer to the NI RF Vector Signal Analyzers Help for more information about renaming devices. NI PXIe-5663E Getting Started Guide | © National Instruments | 19...
-
Page 20: Locating The Software And Examples
Windows 10 (32-bit)/8.1 (32-bit)/7 (32-bit)— Program Files\National Instruments • Windows 10 (64-bit)/8.1 (64-bit)/7 (64-bit)— Program Files (x86)\National Instruments Microsoft .NET For the location of .NET class libraries, refer to the installed NI-RFmx readme. 20 | ni.com | NI PXIe-5663E Getting Started Guide... - Page 21 Program Files (x86)\IVI Foundation\IVI Microsoft .NET To use the .NET API, you must install the .NET class libraries. For download and installed file locations, visit ni.com/info and enter Info Code NETAPIdriversupport NI PXIe-5663E Getting Started Guide | © National Instruments | 21...
-
Page 22: Programming Examples Locations
NI Example Finder to locate programming examples. Launch LabVIEW or LabWindows/CVI. Select Help»Find Examples to open the NI Example Finder. Navigate to Hardware Input and Output»Modular Instruments. Open the example that best matches your application requirements. 22 | ni.com | NI PXIe-5663E Getting Started Guide... -
Page 23: Troubleshooting
Power off the chassis. Remove the module from the chassis and inspect it for damage. Do not reinstall a damaged device. Reinstall the module in a different chassis slot. NI PXIe-5663E Getting Started Guide | © National Instruments | 23... -
Page 24: Configuration
Windows 7 Select Start»Control Panel»Device Manager. If you are using a PXI or PXI Express controller, verify that a National Instruments entry appears in the System Devices list. Reinstall NI-RFSA and the module if error conditions appear in the list. If you are using an MXI controller, right-click PCI-to-PCI Bridge, and select Properties from the shortcut menu to verify that the bridge is enabled. -
Page 25: Measurements
2.1 dB of signal amplitude per foot at 2 GHz. Unless you are using high-quality cables, expect losses when working with high-frequency signals. Perform a self-calibration for the NI 5663E. If errors continue, contact NI technical support or visit ni.com/support. NI PXIe-5663E Getting Started Guide | © National Instruments | 25... -
Page 26: Where To Go Next
NI Factory Installation Services, repairs, extended warranty, and other services. Visit ni.com/register to register your NI product. Product registration facilitates technical support and ensures that you receive important information updates from NI. 26 | ni.com | NI PXIe-5663E Getting Started Guide... - Page 27 United States, visit the Worldwide Offices section of ni.com/ niglobal to access the branch office websites, which provide up-to-date contact information, support phone numbers, email addresses, and current events. NI PXIe-5663E Getting Started Guide | © National Instruments | 27...
- Page 28 CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015. © 2014—2016 National Instruments. All rights reserved. 376120D-01 Jul16...