National Instruments PXIe-5663E Getting Started page 13

transients greater than the RF and DC specifications of the NI 5601 RF IN
connector.
NI 5601 RF Downconverter Module Front Panel
The NI 5601 RF downconverter module front panel contains four connectors and
two LEDs.
Figure 1. NI 5601 RF Downconverter Module Front Panel
Table 13. Device Front Panel Icon Definitions
Refer to the user documentation for required maintenance measures to ensure user safety
and/or preserve the specified EMC performance.
The signal pins of this product's input/output ports can be damaged if subjected to ESD. To
prevent damage, turn off power to the product before connecting cables and employ
industry-standard ESD prevention measures during installation, maintenance, and operation.
RF Downconverter
ACCES S ACTIVE
10 MHz –6.6 GHz
RF IN
+20 dBm MAX
[+30 dBm MAX
w/Attenuation]
IF OUT
+20 dBm MAX
LO IN
0 dBm NOM
+20 dBm MAX
LO OUT
0 dBm NOM
ALL PORTS
±5 VDC MAX
50 Ω
PXIe-5663E Getting Started
© National Instruments
13