Changing The Image Scanner's Bluetooth Pin Code - Hand Held Products 2020 User Manual

Changing the Image Scanner's Bluetooth PIN Code

Some devices require a PIN code as part of the Bluetooth security features. Your
image scanner's default PIN is 1234, which you may need to enter the first time
you connect to your PDA or PC. The PIN code must be between 1 and 16
characters. To change the PIN, scan the barcode below and then scan the
appropriate numeric barcodes from the Programming Chart inside the back
cover of this manual. Scan Save to save your selection.
Bluetooth PIN
When authentication is enabled on the Mobility Systems device, you must enter
the PIN of the image scanner.
1. Select Advanced Features -> My Bluetooth Device.
3 - 20 2020/4820/4820 i User's Guide